If you dont have Adobe Acrobat, download it here to view our products as PDFs.

STANDARD CHEQUER PLATE TOP ACCESS COVERS & FRAMES

100 / 400 SERIES FEATURES:

  • Chequer plate solid top lids Underbraced where required to meet stated load ratings.
  • Supplied single seal as standard.
  • Available as double sea.l
  • 400 series twin units have a centre removable beam and frame fixing points.
  • For Kitemarked version see KS10 series in kitemarked steel products.
  • Manufactured under an ISO 9001:2000 Quality System.
  • Finish: Hot dipped galvanised to BS EN ISO 1461 as standard.

PETER SAVAGE 100 SERIES - SINGLE UNIT
38mm Deep Standard Solid Top Access Cover & Frame

PETER SAVAGE 400 SERIES - TWIN UNIT
43mm Deep Twin Solid Top Access Cover & Frame

Product loading codes :

PS101

F.A.C.T.A

Class AA 5 tonne G.L.V.W

PS102

F.A.C.T.A

Class AAA 10 tonne G.L.V.W

PS104

F.A.C.T.A

Class B 44 tonne G.L.V.W

Product loading codes :

PS401

F.A.C.T.A

Class AA 5 tonne G.L.V.W

PS402

F.A.C.T.A

Class AAA 10 tonne G.L.V.W

PS404

F.A.C.T.A

Class B 44 tonne G.L.V.W

G.L.V.W = Gross Laden Vehicle Weight

G.L.V.W = Gross Laden Vehicle Weight

Standard Sizes: (clear opening)
Suffix = A = 300 x 300mm Suffix = F = 750 x 750mm
Suffix = B = 450 x 450mm Suffix = G = 900 x 600mm
Suffix = C = 600 x 450mm Suffix = H = 900 x 750mm
Suffix = D = 600 x 600mm Suffix = J = 900 x 900mm
Suffix = E = 750 x 600mm Suffix = K = 1000 x 1000mm
Non-standard sizes available

Standard Sizes: (clear opening)
Suffix = L = 1200 x 600mm Suffix = R = 1500 x 900mm
Suffix = M = 1200 x 750mm Suffix = T = 1800 x 600mm
Suffix = N = 1200 x 900mm Suffix = V = 1800 x 750mm
Suffix = P = 1500 x 600mm Suffix = W = 1800 x 900mm
Suffix = Q = 1500 x 750mm
Non-standard sizes available

Optional Extras: Double seal. Locking 2 or 4 stainless screws. Locking with M.O.D. approved security screws, Locking with high security screws, Lock and lift devices, Neoprene seal, Peephole inspection point. Flush fitting engraved plate indicating which service i.e. Water, Gas, and Electricity etc.

Steel products - Solid top access covers
   

Peter Savage Limited reserves the right to alter size/weight/design of any item on this list without notice. Sizes/weight and design are approximate and should only be used as a guide. This guide is offered in good faith. Peter Savage Limited accept no responsibility, whatsoever, for any loss or damage, howsoever caused from its use.

Peter Savage Limited, Nuneaton, Head Office
T: 024 7664 1777 F: 024 7637 5250 E: enquiriesn@peter-savage.co.uk
Peter Savage Limited, Wakefield, Northern Office
T: 01924 258 381 F: 01924 258 382 E: enquiriesw@peter-savage.co.uk