If you dont have Adobe Acrobat, download it here to view our products as PDFs.

DUCT COVERS AND FRAMES

1000 SERIES FEATURES:

  • Chequer plate solid top lids Underbraced where required to meet stated load ratings
  • Supplied un-sealed as standard Available single or double seal
  • Units are manufactured to suit any layout which may include 90 degree turns T-Junctions, intersections, non-standard angle turns, etc
  • Manufactured under an ISO 9001:2000 Quality System
  • Finish: Hot dipped galvanised to BS EN ISO 1461 as standard.

PETER SAVAGE 1000 SERIES
43mm Deep Continuous Ducting System

Product loading codes:

PS1001

F.A.C.T.A

Class AA 5 tonne G.L.V.W

PS1002

F.A.C.T.A

Class AAA 10 tonne G.L.V.W

PS1004

F.A.C.T.A

Class B 44 tonne G.L.V.W

PS1007

F.A.C.T.A

Class FL Forklift Loading

G.L.V.W = Gross Laden Vehicle Weight

Standard Sizes: (clear opening)
Suffix = V = 150mm Suffix = D = 600mm
Suffix = W = 225mm Suffix = F = 750mm
Suffix = A = 300mm Suffix = J = 900mm
Suffix = T = 375mm Suffix = K = 1000mm
Suffix = B = 450mm
Length of unit to suit site layout
Non-standard openings available

Optional Extras: Double seal. Locking 4 stainless screws per lid. Locking with M.O.D. approved security screws, Locking with high security screws, Lock and lift devices, Neoprene seal, Peephole inspection point etc.

Steel products - Solid top access covers
   

Peter Savage Limited reserves the right to alter size/weight/design of any item on this list without notice. Sizes/weight and design are approximate and should only be used as a guide. This guide is offered in good faith. Peter Savage Limited accept no responsibility, whatsoever, for any loss or damage, howsoever caused from its use.

Peter Savage Limited, Nuneaton, Head Office
T: 024 7664 1777 F: 024 7637 5250 E: enquiriesn@peter-savage.co.uk
Peter Savage Limited, Wakefield, Northern Office
T: 01924 258 381 F: 01924 258 382 E: enquiriesw@peter-savage.co.uk